2022-02-24

Cut Resistant Gloves Precautions

Cut-resistant gloves should not be used when repairing thorny plants. Because the cut-resistant gloves are made of steel wires, there will be many dense small holes to allow the thorns to pass through. The correct gloves should be used when repairing flowers and plants to avoid injury.

VIEW ARTICLE

2022-02-24

Introduction to Cut Resistant Gloves

Function: anti-cut; Material: high-strength and high-modulus polyethylene fiber (DOYENTRONTEX Fiber) covered with glass fiber, spandex or steel wire; Steel wire cut-proof grade: EN388 cut-proof grade 3-5;

VIEW ARTICLE

2022-02-24

Cut Resistant Gloves

Cut-resistant gloves are gloves that are difficult to cut and protect the opponent. Cut-resistant gloves have extraordinary cut-resistant performance and wear-resistant performance, making them high-quality hand labor protection products. The service life of a pair of cut-resistant gloves is equivalent to 500 pairs of ordinary thread gloves, which can be called "one for one hundred". It can be widely used in meat segmentation, glass processing, metal processing, petrochemical, disaster relief, fire rescue and other industries.

VIEW ARTICLE

2022-02-24

As a kitchen chef, you must have professional appliances that match the strength

We know that many of the big guys' knives are custom-made, engraved with names and valuable. The big guys are usually meticulous about the maintenance of the knives, appreciating and collecting them like works of art. In this way, when using knives, the effect of "one man and knife" can be achieved.

VIEW ARTICLE

2022-02-24

Scope of application of nitrile gloves

Housework, factory protection in electronics, chemical industry, aquaculture, glass, food, etc., used in hospitals, scientific research and other industries In order to prevent the gloves from slipping and improve the comfort of use, the palm of the anti-cutting gloves has been dipped. Among them, polyurethane gloves have thinner colloids and are generally used in horticultural and electronic industries with relatively high sensitivity requirements; latex gloves and nitrile gloves have relatively thick colloids, latex gloves have better anti-slip performance, and nitrile gloves have better oil-proof performance. For machining, logistics handling, oil depot operations, etc.

VIEW ARTICLE

2022-02-24

Nitrile gloves

Nitrile rubber is obtained by emulsion polymerization of butadiene and acrylonitrile. Its products have excellent oil resistance, high wear resistance and good heat resistance. It is made of high-quality nitrile rubber and other additives, and is refined and processed; it does not contain protein, has no allergic reaction to human skin, is non-toxic, harmless, durable, and has good adhesion.

VIEW ARTICLE

2022-01-21

The correct cleaning of labor protection gloves can effectively extend the service life

Disposable labor protection gloves are naturally to be disposed of after use, while some other labor protection gloves need to be used multiple times, such as labor protection cotton gloves, labor protection cut-resistant gloves, labor protection leather gloves, and so on. These types of gloves need to be cleaned regularly after they are purchased and worn by employees. This can effectively increase the life of their gloves. The following is the correct way to clean gloves.

VIEW ARTICLE

2022-01-20

Keep these four principles in mind when choosing labor protection gloves!

1. When choosing labor protection gloves, it is recommended that you choose the right size gloves according to the size of your hands. If you think about it, you will know that if the gloves are too large, they will slip off, while too small will make your hands very uncomfortable. The place is exposed and may be injured at work. 2. When you formally prepare to wear gloves, you should check whether the gloves have quality problems. Some gloves have serious quality problems, which you can tell with the naked eye. For example, if the gloves are damaged, they must not be worn. Replace the undamaged gloves immediately. 3. It is very smart to choose labor protection gloves according to your working environment. As mentioned above, the protective functions of different gloves are different. As long as you choose the corresponding gloves according to your own working environment, this can make the gloves play a real role and protect your hand safety. 4. You don't need to use cheap gloves. You may think that the cheap gloves you buy are not much different from the appearance of high-priced gloves, and they can be used normally. But after you wear them, you will know that cheap gloves have many problems, such as skin allergies, poor protection performance, and easy damage. If the work is more dangerous, the hands will be directly injured, and the consequences will be disastrous. Choosing labor protection gloves is a very important thing, not everyone can choose the right gloves. You can be very responsible here. Tell your customers and friends that when you are purchasing gloves, the suggestion is to tell the manufacturer’s account manager about your working environment. They will recommend suitable gloves for you according to your working environment. You can produce them after you are satisfied. , Can solve a lot of troubles.

VIEW ARTICLE